Blog

OXYACETYLENE WELDINGFiller Metal: Use a mild steel filler, 3⁄32" diameter, free of rust. (American Welding Society class

• gas metal arc
• how to weld exhaust
• metal arc welding

Backpressure A key performance factor in selecting the proper muffler is backpressure. For the most efficient engine

• engine backpressure
• muffler backpressure
• what is backpressure in engine

Bent Tubes & Elbows For directional changes of exhaust flow in exhaust systems. Available in common angles (90°, 67°

Easy Maintenance Tips Reduce Exhaust Noise  1. Check the exhaust tubing. Repair or replace worn or leaking componen

• big rig truck noise
• truck noise
• where is the noise coming from on truck

409 Stainless is a softer form of 304. It IS magnetic, but still retains some anti-rusting materials. Normally used in

Introduction A system designer must consider environmental and performance criteria when sizing and positioning the exh

• 10" generator exhaust
• 12" exhaust pipe
• generator exhaust

What other exhaust parts will I need?Depending on your current exhaust system, you could need several truck pipes to com

• internal baffle
• internal muffler
• internal muffler instructions

Newer Kenworth Aerocab exhaust layout with 2 catalytic converters A K18

• kenworth exhaust
• kenworth pipes
• t800 exhaust

Bolting on a performance exhaust system adds an exciting new tone to your truck. But, that sweet song becomes annoying n

• 304 stainless steel
• 409 stainless steel
• choosing 304 vs 409

ID ENDS4" 48" P4-48EXC4" 84" P4-84EXC5" 36" P5-36EXC5" 48" P5-48EXC5" 60" P5-60EXC5" 72" P5-72EXC5" 84" P5-84EXC5" 96" P

ID ENDS3" 24" S3-24EXA -3" 36" S3-36EXA -3.5" 24" S35-24EXA -3.5" 36" S35-36EXA -3.5" 48" S35-48EXA -3.5" 60" S35-60EXA